Produkte und Fragen zum Begriff Trend:
-
A metal rule depth gauge to set height of router cutters and saw blades accurately. Horizontal & vertical measuring. For hand routers, router tables and saw benches. 60mm wide aperture & accurate to 0.5mm. 80mm measurement range. U section plastic injection moulding with unique cam lever lock. Steel rule dual metric & imperial scale. Self standing for setting cutter depth on router tables and low profile for backfence adjustment. Patent No. GB2386085 & US7000331. Features and Benefits: • Horizontal & vertical measuring • For hand routers, router tables and saw benches • 60mm wide aperture & accurate to 0.5mm • 80mm measurement range • U section plastic injection moulding with unique cam lever lock • Steel rule dual metric & imperial scale • Self standing for setting cutter depth on router tables • Low profile for backfence adjustment
Preis: 10.95 € | Versand*: 4.95 € -
Handheld scribing tool for architrave, skirting, scribing doors, scribing worktops, setting hinge recess depth etc. Articulated arm allows the required offset to be set precisely from 1mm to 40mm giving full flexibility. Use for a multitude of applications including hanging doors, installing worktops, plinths & skirting, architraves, flooring, window boards, panelling, shop fitting and tiling. Can be used as a marking gauge. Thin guide plate (0.5mm) for access into narrow gaps ensuing full versatility. Flat base ensures object surface remains in contact ensuring a consistent scribe. Knurled foregrip sliding steel guide plate allows up to 50mm projection. Thumb wheel fine adjustment. Marks narrow pencil line of 0.7mm width ensuring accuracy. Spare graphite refillls available. Patent EP 2605889 Contents: 3 x Graphite leads
Preis: 45.95 € | Versand*: 4.95 € -
Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate recess for popular door locks. For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate. Deeper mortises can be achieved with a suitable size of auger bit. Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood. Steel plates & body. An auger bit and drill is required to complete deep mortises. The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise. Contents: 1 x Guide Bush Collar 12 x Face Plate Templates 5 x Mortise Templates 6 x Spacer FingersFeatures & Benefits• For cutting commonly needed mortise & face plate recesses • Includes 16 interchangeable templates • Suitable for most common sash mortises and dead locks • Fast, clean and accurate results on doors 34mm - 58mm thick • Additional templates available separatelyContents• Guide Bush Collar • 7/8"x 1/8" (22.2x156 mm) Face Plate Template • 7/8"x 6 " (22.5x152.5 mm) Face Plate Template • 1"x 4 3/4" (25.4x121 mm) Face Plate Template • 1"x 5" (25.4x127.5 mm) Face Plate Template • 1"x 5 1/4" (25.4x133.5 mm) Face Plate Template • 1"x 5 3/4" (25.4x145 mm) Face Plate Template • 1"x 6" (25.4x153 mm) Face Plate Template • 1"x 6" (25.4x156.5 mm) Face Plate Template • 1"x 6 1/2" (25.4x165.5 mm) Face Plate Template • 1"x 7" (25.4x177 mm) Face Plate Template • 1"x 2 1/4" (25x57.5 mm) Upper Face Plate Template • 1"x 2 1/4" (26x56.5 mm) Lower Face Plate Template • 1"x 6 3/8" (25.6x162mm) Face Plate Template • 5/8" x 2 7/8" (16x72 mm) Mortise Template • 5/8" x 4 1/4" (16x107 mm) Mortise Template • 3/4" x 3 1/8" (19x78 mm) Mortise Template • 3/4" x 4 1/4" (19x109 mm) Mortise Template • Spacer Fingers (x6)
Preis: 123.95 € | Versand*: 4.95 € -
This router compass is used for cutting circles & arcs from 100mm up to 610mm radius. Made of clear plastic. Printed graduated scale for precise radius setting. Fits to the base of a router. Router not included. Plate has a 30mm hole to allow a 30mm guide bush to locate. Suitable for the following routers directly when using fixing screws Trend T4, T5, T10, T11 Dewalt DW613, 614, 615, 620, 621, 624, 625, 626 Draper PT1200V Elu MOF 96, 131, 177E Makita RP0910, 1110C Performance Pro CLM1250R, 2050R, 127R Contents: 1 x Main Plate 1 x 'V' Pivot Point 1 x 4mm Pivot Point 2 x Fixing screws
Preis: 75.95 € | Versand*: 7.95 € -
This TCT countersink clamps onto any drill between 3.0mm and 7.2mm in diameter. Recommended for wood and man-made boards By reversing the countersink on the drill, it can be used as a non-cutting depth stop. Ensure flutes of drill are aligned with flutes of countersink. Do not overtighten screw. Not suitable for production applications and not suitable for ferrous and non-ferrous metals. Specifications: • Cut Length Metric: 12 • Overall Length Metric: 32 • Angle: 45
Preis: 37.95 € | Versand*: 4.95 € -
Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate recess for popular door locks. For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate. Deeper mortises can be achieved with a suitable size of auger bit. Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood. Steel plates & body. An auger bit and drill is required to complete deep mortises. The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise. Contents: 1 x Guide Bush Collar 12 x Face Plate Templates 5 x Mortise Templates 6 x Spacer FingersFeatures & Benefits• For cutting commonly needed mortise & face plate recesses • Includes 16 interchangeable templates • Suitable for most common sash mortises and dead locks • Fast, clean and accurate results on doors 34mm - 58mm thick • Additional templates available separatelyContents• Guide Bush Collar • 7/8"x 1/8" (22.2x156 mm) Face Plate Template • 7/8"x 6 " (22.5x152.5 mm) Face Plate Template • 1"x 4 3/4" (25.4x121 mm) Face Plate Template • 1"x 5" (25.4x127.5 mm) Face Plate Template • 1"x 5 1/4" (25.4x133.5 mm) Face Plate Template • 1"x 5 3/4" (25.4x145 mm) Face Plate Template • 1"x 6" (25.4x153 mm) Face Plate Template • 1"x 6" (25.4x156.5 mm) Face Plate Template • 1"x 6 1/2" (25.4x165.5 mm) Face Plate Template • 1"x 7" (25.4x177 mm) Face Plate Template • 1"x 2 1/4" (25x57.5 mm) Upper Face Plate Template • 1"x 2 1/4" (26x56.5 mm) Lower Face Plate Template • 1"x 6 3/8" (25.6x162mm) Face Plate Template • 5/8" x 2 7/8" (16x72 mm) Mortise Template • 5/8" x 4 1/4" (16x107 mm) Mortise Template • 3/4" x 3 1/8" (19x78 mm) Mortise Template • 3/4" x 4 1/4" (19x109 mm) Mortise Template • Spacer Fingers (x6)
Preis: 123.95 € | Versand*: 4.95 € -
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 8.9 • Bearing Dia Metric: 28 • Type or Grade: Nylon sleeve • Sawbore: 8
Preis: 21.95 € | Versand*: 4.95 € -
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 4.76 • Cut Length Imperial: 3/16 • Bearing Dia Metric: 15.9 • Bearing Dia Imperial: 5/8 • Sawbore: 3.2 • Sawbore Imperial: 1/8
Preis: 14.95 € | Versand*: 4.95 € -
Trend Router Cutter Bearing - for 3/16in bottom mounting High quality ball bearing for free running against an edge to prevent heat build up. 3/16in inside diameter for use on bottom mounted trimmer and profiling cutters. 1/2in outside diameter for matched fit to trimming and templating cutters. Bearings are grease packed for maximum efficiency and lifespan. Shielding to both sides of the bearing prevents penetration of dust for maximum performance. Specifications: • Cut Length Metric: 4.76 • Cut Length Imperial: 3/16 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Sawbore: 4.76 • Sawbore Imperial: 3/16
Preis: 7.49 € | Versand*: 4.95 € -
Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing failure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 7.9 • Cut Length Imperial: 5/16 • Bearing Dia Metric: 28.6 • Bearing Dia Imperial: 1 1/8 • Sawbore: 12.7 • Sawbore Imperial: 1/2
Preis: 15.95 € | Versand*: 4.95 €
Ähnliche Suchbegriffe für Trend:
-
Is roux still trendy for soups?
Roux is a classic technique for thickening soups and sauces, and it continues to be a popular method in many culinary traditions. While there are many modern thickening agents available, such as cornstarch and arrowroot, roux is still widely used in professional and home kitchens for its ability to add flavor and richness to soups. Additionally, the resurgence of interest in traditional cooking methods and comfort foods has kept roux relevant in contemporary culinary trends. Overall, roux remains a timeless and versatile technique for thickening soups.
-
When should the bicycle tire tread be changed?
The bicycle tire tread should be changed when it becomes worn down or shows signs of damage. Worn down tread can lead to decreased traction and increased risk of slipping, especially in wet or slippery conditions. It's important to regularly inspect the tire tread for any signs of wear and tear, and to replace the tires as needed to ensure safe and efficient riding.
-
Do men tend to fall in love more when a woman is smarter than the man or when she is a bit dumb?
There is no one-size-fits-all answer to this question as every individual is different. Some men may be attracted to intelligence and find it endearing when a woman is smarter than them, while others may feel intimidated or emasculated by it. On the other hand, some men may prefer a partner who is less intelligent or "a bit dumb" because they feel more in control or superior in the relationship. Ultimately, the concept of falling in love is complex and multifaceted, and individual preferences and dynamics play a significant role in determining what attracts someone to another person.
-
What is the opposite of a trend?
The opposite of a trend is a fad. While a trend is a general direction in which something is developing or changing, a fad is a short-lived, popular trend that quickly gains popularity but fades away just as quickly. Trends tend to have a longer-lasting impact and influence over time, while fads are more temporary and fleeting.
-
Would these two people astrologically tend to get along?
Astrologically, the compatibility between two people can be determined by comparing their birth charts. Factors such as sun signs, moon signs, and the positions of other planets can indicate potential harmony or conflict. Without specific birth chart information, it is difficult to definitively determine if two people would astrologically tend to get along. However, it is important to remember that astrology is just one factor in relationships, and individuals can have successful and fulfilling connections regardless of astrological compatibility.
-
Why are TikTok and Instagram being warned for trend sounds?
TikTok and Instagram are being warned for trend sounds because these platforms have been found to be promoting harmful or inappropriate content through the use of certain sounds or music. Some trend sounds may contain offensive language, promote dangerous challenges, or encourage harmful behavior among users. By issuing warnings, the platforms aim to protect their users, especially younger audiences, from being exposed to potentially harmful trends. Additionally, these warnings serve as a reminder for users to be cautious and responsible when participating in trends on social media platforms.
-
What is the order for tires with directional tread?
The order for tires with directional tread is important to ensure that they are installed correctly for optimal performance. When mounting directional tires, it is essential to pay attention to the direction of the arrow on the sidewall, which indicates the intended rotation of the tire. The tires should be installed so that the arrow points in the direction of forward motion. It is also important to ensure that all tires on the same axle have the same directional rotation. Following the correct order for directional tread tires will help maintain traction and handling performance.
-
Why are the trends of youth today only antisocial, instead of like before?
The trends of youth today may appear more antisocial compared to before due to a variety of factors. One reason could be the increasing use of technology and social media, which can lead to more time spent online and less face-to-face interaction. Additionally, societal pressures and challenges such as academic stress, economic uncertainty, and social isolation may contribute to a sense of disconnection and antisocial behavior among young people. It is important to consider the complex interplay of these factors when examining trends in youth behavior.
-
What is the new TikTok trend?
The new TikTok trend involves users creating videos that show their transformation from their everyday appearance to a more glamorous or stylish look. This trend often features a transition effect where the user goes from wearing casual clothes to a more fashionable outfit, or from minimal makeup to a more dramatic look. The trend has gained popularity as users showcase their creativity and style in these transformation videos, often set to catchy music or sound effects.
-
Why do people find things ugly, but when it becomes a trend, they suddenly find it beautiful?
People's perceptions of beauty are often influenced by societal norms and cultural trends. When something is initially considered ugly, it may be because it deviates from the current standards of beauty. However, as it gains popularity and becomes a trend, people's perceptions can shift as they start to see it more frequently and in a different context. Additionally, the influence of celebrities, social media, and advertising can also play a role in shaping people's perceptions of beauty, causing them to embrace something they once found unattractive.
-
In which articles do customers particularly behave price-conscious? Margarine, milk, tablet PC, car, trendy clothing, pasta, fitted kitchen.
Customers particularly behave price-conscious in articles such as margarine, milk, pasta, and trendy clothing. These are everyday items that are purchased frequently, and customers are more likely to compare prices and look for deals. Additionally, fitted kitchens may also be an area where customers are price-conscious, as it is a significant investment and customers may want to ensure they are getting the best value for their money.
-
What is the Council of Trent?
The Council of Trent was a major ecumenical council of the Catholic Church that took place between 1545 and 1563. It was convened in response to the Protestant Reformation and aimed to address the theological and disciplinary issues raised by the reformers. The council reaffirmed traditional Catholic teachings, clarified doctrines, and enacted reforms within the Church. It also addressed issues such as the authority of the Pope, the interpretation of scripture, and the sacraments. The Council of Trent had a significant impact on the development of Catholic doctrine and practice, and its decrees continue to shape the beliefs and practices of the Catholic Church today.